Cheap VPS & Xen Server

Business & Earning Opportunity

L2TP over IPsec using OpenSwan with Freeradius authentication on Ubuntu 16.04


This article is about the layer 2 tunneling protocol (L2TP) with IPsec to provide end-to-end encryption in the layer 2 VPN because security features are not available in L2TP.  The open source implementations of IPsec are StrongSwan and OpenSwan, both are supported on all Linux distributions. In this tutorial, OpenSwan is used to provide the security channel for L2TP VPN. Freeradius is a well-known open source tool which provides different types of authentication for users. Freeradius is used to authenticate the L2TP VPN user before establishing a secure channel. An android based client will be used for the L2TP based secure tunnel.

Installation of required packages

Following important packages will be installed on the Ubuntu 16.04 LTS.

  • Freeradius Server/Client
  • Poptop Server
  • xl2tpd
  • Openswan for IPsec
  • MySQL Server/client
  • Bison & Flex
  • GMP development library

As shown below, most of the required packages are all available in the Ubuntu 16.04 LTS repository.

apt-get update

apt-get install -y mysql-server mysql-client freeradius-mysql pptpd xl2tpd

The following screenshot shows how the password for the user “root” of the MySQL database server is being set during the installation process.

The following packages are required for the OpenSwan installation from source on the Ubuntu 16.04 platform.

apt-get install -y build-essential libgmp3-dev bison flex

The Freeradius client and OpenSwan packages are not available in the repository, so both tools have been installed from source.

Installation of the Freeradius client

Download the latest Freeradius client from the following link:

wget https://github.com/FreeRADIUS/freeradius-client/archive/master.zip

unzip master.zip

mv freeradius-client-master freeradius-client

cd freeradius-client

First, run the configure script with the prefix switch and install the software using the make command.

./configure –prefix=/

make && make install

Installation of OpenSwan

The source code of the OpenSwan IPsec tool is available on the following link. Download the archive and unpack it.

wget https://download.openswan.org/openswan/openswan-latest.tar.gz

tar -xzf openswan-latest.tar.gz

cd openswan-*

Run the following command to compile and install OpenSwan.

make programs

make install

Configuration

Before we start with the configuration of the installed packages, the following base configurations (iptables and sysctl) are required on the Ubuntu platform.

Enter following iptables rules for both networks (10.20.30.0/24 & 10.10.10.0/24) on the terminal.

iptables -t nat -I POSTROUTING -s 10.20.30.0/24 -j SNAT –to 192.168.15.4
iptables -t nat -I POSTROUTING -s 10.10.10.0/24 -j SNAT –to 192.168.15.4

Above rules should be saved into the /etc/iptables.rc file to apply them at boot time.

chmod +x /etc/iptables.rc

sed -i “/iptables.rc/d” /etc/rc.local

sed -i “1a/etc/iptables.rc” /etc/rc.local

Add the following lines in the /etc/sysctl.conf file to enable forwarding on the Linux machine.

net.ipv4.ip_forward = 1
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.icmp_ignore_bogus_error_responses = 1

Run the following command to apply changes.

sysctl -p

Configuration of the Freeradius Server

Run the following command to change the password for freeradius.

sed -i “s/PASSWORD(‘radpass’)/PASSWORD(‘test’)/g” /etc/freeradius/sql/mysql/admin.sql

The following MySQL commands will configure the Freeradius server on Ubuntu.

mysql –protocol=tcp -h localhost -u root -ptest

create database radius  # create DB radius

mysql –protocol=tcp -h localhost -u root -ptest radius < /etc/freeradius/sql/mysql/admin.sql

mysql –protocol=tcp -h localhost -u root -ptest radius < /etc/freeradius/sql/mysql/cui.sql

Adding a proper date to fix the invalid default value issue in /etc/freeradius/sql/mysql/cui.sql.

After correction in the /etc/freeradius/sql/mysql/cui.sql file and rerun above command to fix the above error.

mysql –protocol=tcp -h localhost -u root -ptest radius < /etc/freeradius/sql/mysql/ippool.sql

mysql –protocol=tcp -h localhost -u root -ptest radius < /etc/freeradius/sql/mysql/nas.sql

mysql –protocol=tcp -h localhost -u root -ptest radius < /etc/freeradius/sql/mysql/schema.sql

mysql –protocol=tcp -h localhost -u root -ptest radius < /etc/freeradius/sql/mysql/wimax.sql

Run the folowing sed command to change the default password of user “radius”.  In this tutorial, the password for the user “radius” is “test”. Chose a secure password on your server.

sed -i “s/password = \”radpass\”/password = \”test\”/g” /etc/freeradius/sql.conf

Creating a soft link for the sql configuration in the modules directory of the Freeradius server.

ln -sf /etc/freeradius/sql.conf /etc/freeradius/modules/sql

Following files are not present on Ubuntu 16.04, therefore, create all required files with the described content.

  • /etc/freeradius/modules/hourlylytraffic
  • /etc/freeradius/modules/dailytraffic
  • /etc/freeradius/modules/monthlytraffic

/etc/freeradius/modules/hourlytraffic

sqlcounter hourlytrafficcounter {
    counter-name = Hourly-Traffic
    check-name = Hourly-Traffic
    sqlmod-inst = sql
    key = User-Name
    reset = 1h
    query = "SELECT SUM(acctinputoctets + acctoutputoctets) DIV 1048576 FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) > '%b'"
}

/etc/freeradius/modules/dailytraffic

sqlcounter dailytrafficcounter {
    counter-name = Daily-Traffic
    check-name = Daily-Traffic
    sqlmod-inst = sql
    key = User-Name
    reset = daily
    query = "SELECT SUM(acctinputoctets + acctoutputoctets) DIV 1048576 FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) > '%b'"
}


/etc/freeradius/modules/monthlytraffic

sqlcounter monthlytrafficcounter {
    counter-name = Monthly-Traffic
    check-name = Monthly-Traffic
    sqlmod-inst = sql
    key = User-Name
    reset = monthly
    query = "SELECT SUM(acctinputoctets + acctoutputoctets) DIV 1048576 FROM radacct WHERE UserName='%{%k}' AND UNIX_TIMESTAMP(AcctStartTime) > '%b'"
}

The following file is important for freeradius server configuration. Our running configurations are given below.

/etc/freeradius/sites-enabled/default

authorize {
    preprocess
    chap
    mschap
    digest
    suffix
    eap {
        ok = return
    }
    files
    sql
    expiration
    logintime
    pap
    hourlytrafficcounter
    dailytrafficcounter
    monthlytrafficcounter
}
authenticate {
    Auth-Type PAP {
        pap
    }
    Auth-Type CHAP {
        chap
    }
    Auth-Type MS-CHAP {
        mschap
    }
    digest
    unix
    eap
}
preacct {
    preprocess
    acct_unique
    suffix
    files
}
accounting {
    detail
    unix
    radutmp
    sql
    exec
    attr_filter.accounting_response
}
session {
    radutmp
    sql
}
post-auth {
    sql
    exec
    Post-Auth-Type REJECT {
        attr_filter.access_reject
    }
}
pre-proxy {
}
post-proxy {
    eap
}


Use the following command to restart the freeradius server and to verify the configuration.

/etc/init.d/freeradius restart

Configuration of the Freeradius client

Following command sets the hostname and secret in the “servers” file of the freeradius client.

echo -e “localhost\ttesting123” >> /etc/radiusclient/servers

Create the dictionary.microsoft configuration file for Windows based clients.

vi /etc/radiusclient/dictionary.microsoft

#
#       Microsoft's VSA's, from RFC 2548
#
#       \$Id: poptop_ads_howto_8.htm,v 1.8 2008/10/02 08:11:48 wskwok Exp \$
#
VENDOR          Microsoft       311     Microsoft
BEGIN VENDOR    Microsoft
ATTRIBUTE       MS-CHAP-Response        1       string  Microsoft
ATTRIBUTE       MS-CHAP-Error           2       string  Microsoft
ATTRIBUTE       MS-CHAP-CPW-1           3       string  Microsoft
ATTRIBUTE       MS-CHAP-CPW-2           4       string  Microsoft
ATTRIBUTE       MS-CHAP-LM-Enc-PW       5       string  Microsoft
ATTRIBUTE       MS-CHAP-NT-Enc-PW       6       string  Microsoft
ATTRIBUTE       MS-MPPE-Encryption-Policy 7     string  Microsoft
# This is referred to as both singular and plural in the RFC.
# Plural seems to make more sense.
ATTRIBUTE       MS-MPPE-Encryption-Type 8       string  Microsoft
ATTRIBUTE       MS-MPPE-Encryption-Types  8     string  Microsoft
ATTRIBUTE       MS-RAS-Vendor           9       integer Microsoft
ATTRIBUTE       MS-CHAP-Domain          10      string  Microsoft
ATTRIBUTE       MS-CHAP-Challenge       11      string  Microsoft
ATTRIBUTE       MS-CHAP-MPPE-Keys       12      string  Microsoft encrypt=1
ATTRIBUTE       MS-BAP-Usage            13      integer Microsoft
ATTRIBUTE       MS-Link-Utilization-Threshold 14 integer        Microsoft
ATTRIBUTE       MS-Link-Drop-Time-Limit 15      integer Microsoft
ATTRIBUTE       MS-MPPE-Send-Key        16      string  Microsoft
ATTRIBUTE       MS-MPPE-Recv-Key        17      string  Microsoft
ATTRIBUTE       MS-RAS-Version          18      string  Microsoft
ATTRIBUTE       MS-Old-ARAP-Password    19      string  Microsoft
ATTRIBUTE       MS-New-ARAP-Password    20      string  Microsoft
ATTRIBUTE       MS-ARAP-PW-Change-Reason 21     integer Microsoft
ATTRIBUTE       MS-Filter               22      string  Microsoft
ATTRIBUTE       MS-Acct-Auth-Type       23      integer Microsoft
ATTRIBUTE       MS-Acct-EAP-Type        24      integer Microsoft
ATTRIBUTE       MS-CHAP2-Response       25      string  Microsoft
ATTRIBUTE       MS-CHAP2-Success        26      string  Microsoft
ATTRIBUTE       MS-CHAP2-CPW            27      string  Microsoft
ATTRIBUTE       MS-Primary-DNS-Server   28      ipaddr
ATTRIBUTE       MS-Secondary-DNS-Server 29      ipaddr
ATTRIBUTE       MS-Primary-NBNS-Server  30      ipaddr Microsoft
ATTRIBUTE       MS-Secondary-NBNS-Server 31     ipaddr Microsoft
#ATTRIBUTE      MS-ARAP-Challenge       33      string  Microsoft
#
#       Integer Translations
#
#       MS-BAP-Usage Values
VALUE           MS-BAP-Usage            Not-Allowed     0
VALUE           MS-BAP-Usage            Allowed         1
VALUE           MS-BAP-Usage            Required        2
#       MS-ARAP-Password-Change-Reason Values
VALUE   MS-ARAP-PW-Change-Reason        Just-Change-Password            1
VALUE   MS-ARAP-PW-Change-Reason        Expired-Password                2
VALUE   MS-ARAP-PW-Change-Reason        Admin-Requires-Password-Change  3
VALUE   MS-ARAP-PW-Change-Reason        Password-Too-Short              4
#       MS-Acct-Auth-Type Values
VALUE           MS-Acct-Auth-Type       PAP             1
VALUE           MS-Acct-Auth-Type       CHAP            2
VALUE           MS-Acct-Auth-Type       MS-CHAP-1       3
VALUE           MS-Acct-Auth-Type       MS-CHAP-2       4
VALUE           MS-Acct-Auth-Type       EAP             5
#       MS-Acct-EAP-Type Values
VALUE           MS-Acct-EAP-Type        MD5             4
VALUE           MS-Acct-EAP-Type        OTP             5
VALUE           MS-Acct-EAP-Type        Generic-Token-Card      6
VALUE           MS-Acct-EAP-Type        TLS             13
END-VENDOR Microsoft


vi /etc/radiusclient/dictionary.merit

#
#       Experimental extensions, configuration only (for check-items)
#       Names/numbers as per the MERIT extensions (if possible).
#
ATTRIBUTE       NAS-Identifier          32      string
ATTRIBUTE       Proxy-State             33      string
ATTRIBUTE       Login-LAT-Service       34      string
ATTRIBUTE       Login-LAT-Node          35      string
ATTRIBUTE       Login-LAT-Group         36      string
ATTRIBUTE       Framed-AppleTalk-Link   37      integer
ATTRIBUTE       Framed-AppleTalk-Network 38     integer
ATTRIBUTE       Framed-AppleTalk-Zone   39      string
ATTRIBUTE       Acct-Input-Packets      47      integer
ATTRIBUTE       Acct-Output-Packets     48      integer
# 8 is a MERIT extension.
VALUE           Service-Type            Authenticate-Only       8

Add the following lines to the /etc/radiusclient/dictionary file.

INCLUDE /etc/radiusclient/dictionary.merit
INCLUDE /etc/radiusclient/dictionary.microsoft
ATTRIBUTE Hourly-Traffic 1000 integer
ATTRIBUTE Daily-Traffic 1001 integer
ATTRIBUTE Monthly-Traffic 1002 integer


Following configuration (which is related to IPv6)  in /etc/radiusclient/dictionary file should be commented out to run the radius client.

ATTRIBUTE       NAS-Filter-Rule         92      string
ATTRIBUTE       Originating-Line-Info   94      string
ATTRIBUTE       NAS-IPv6-Address        95      string
ATTRIBUTE       Framed-Interface-Id     96      string
ATTRIBUTE       Framed-IPv6-Prefix      97      ipv6prefix
ATTRIBUTE       Login-IPv6-Host         98      string
ATTRIBUTE       Framed-IPv6-Route       99      string
ATTRIBUTE       Framed-IPv6-Pool        100     string
ATTRIBUTE       Error-Cause             101     integer
ATTRIBUTE       EAP-Key-Name            102     string
#
#       RFC6911 IPv6 attributes
#
ATTRIBUTE       Framed-IPv6-Address     168     ipv6addr
ATTRIBUTE       DNS-Server-IPv6-Address 169     ipv6addr
ATTRIBUTE       Route-IPv6-Information  170     ipv6prefix



Configuration of the Poptop server

Add the following configuration in the /etc/pptpd.conf file.

localip 10.20.30.1
remoteip 10.20.30.2-254

Run  following sed command on the /etc/ppp/pptpd-options file.

sed -i “/^ms-dns/d” /etc/ppp/pptpd-options
sed -i -e “/radius.so/d” -e “/radattr.so/d” /etc/ppp/pptpd-options

Add the following lines in /etc/ppp/pptpd-options file.

ms-dns 8.8.8.8
ms-dns 8.8.4.4
plugin /usr/lib/pppd/2.4.7/radius.so
plugin /usr/lib/pppd/2.4.7/radattr.so

Restart the pptpd service to apply the above changes.

service pptpd restart

Configuration of xl2tp

Include following configuration lines in the /etc/xl2tpd/xl2tpd.conf file as shown in following figure.

[global]
ipsec saref = yes

[lns default]
ip range = 10.10.10.2-10.10.10.255
local ip = 10.10.10.1
refuse chap = yes
refuse pap = yes
require authentication = yes
ppp debug = yes
pppoptfile = /etc/ppp/options.xl2tpd
length bit = yes

Configuration of OpenSwan

Add the following setting of the ipsec secret file in  /etc/ipsec.secrets.

192.168.15.4 %any  0.0.0.0: PSK “test”

IPsec configuration for L2TP tunnel is included in /etc/ipsec.conf file.

version 2.0

config setup
nat_traversal=yes
virtual_private=%v4:192.168.0.0/16,%v4:10.0.0.0/8,%v4:172.16.0.0/12,%v4:25.0.0.0/8,%v4:!10.254.253.0/24
protostack=netkey
#protostack=mast  # used for SAref + MAST only
interfaces=”%defaultroute”
oe=off

conn psk-l2tp
pfs=no
auto=add
rekey=no
# overlapip=yes   # for SAref + MAST
# sareftrack=yes  # for SAref + MAST
type=transport
left=192.168.15.4
leftprotoport=17/1701
right=%any
rightprotoport=17/%any
rightsubnet=vhost:%priv,%no
authby=secret

Configuration of PPP server

Add the following configuration in /etc/ppp/options.xl2tpd file.

ipcp-accept-local
ipcp-accept-remote
ms-dns 8.8.8.8
ms-dns 8.8.4.4
noccp
auth
crtscts
idle 1800
mtu 1200
mru 1200
nodefaultroute
debug
lock
proxyarp
connect-delay 5000
plugin /usr/lib/pppd/2.4.7/radius.so
plugin /usr/lib/pppd/2.4.7/radattr.so

After successful configuration of all required packages, now restart all services to test L2TP VPN.

Restarting IPsec & xl2tp services.

The following figure shows that the freeradius server is running in daemon mode which is helpful to identify that the server is working.

Insert a user account in the MySQL database to test the configuration.

INSERT INTO radius.radcheck (username, attribute, op, value) VALUES (‘username’,’User-Password’,’:=’,’userpassword’);

The following command checks that the Freeradius server is working on localhost.

radtest username userpassword localhost 0 testing123

Configuration of L2TP Android client

Go to settings  ==> More ==> VPN ==>Add VPN Network on android phone and create new L2TP PSK VPN as shown below.

After creation of new L2TP VPN, click on it and enter username/password (configured on the the freeradius server).

Following figure shows that L2TP VPN is connecting.

Following screens shows that L2TP VPN is successfully connected using an android client.

L2TP VPN Status

Freeradius shows the successful authentication of L2TP android client.

 

OpenSwan log (/var/log/auth.log) and xl2tp log (/var/log/syslog) also shows the status of L2TP VPN.

tail -f /var/log/auth.log

tail -f /var/log/syslog

In this tutorial, layer 2 tunneling protocol is used with IPSec and Freeradius to provide security and authentication mechanisms. An android based client is used to demonstrate the working of L2TP over IPsec.

 

 

Comments

comments